Compare New Jersey Frame Relay T1 Price Quotes with Free Consultation

Frame Relay T1

“When the top T1 providers must compete for your business, you win!”

Real-time New Jersey frame relay T1 Rate Quotes are Here!
Frame relay T1 is designed to provide cost effective data transmission over a shared network. Frame relay derived its name from the fact that it transfers data via various sized units referred to as frames. These frames are commonly transmitted through a shared network. (For more about frame relay T1 please click here)

Real-Time frame relay T1 Quoting Machine

frame relay T1 service providers:

New Jersey frame relay T1 Search

Coverage Area

Unlike DSL and other broadband technologies that are limited to only densely populated areas, T1 service is available just about anywhere with a phone line. T1, also known as DS1, uses repeaters to boost up the signal strength of the transmission - allowing it to travel up to 50 miles away from the nearest Central Office location.

Here's how it works:

Enter your information in the form above.
Receive real-time unbiased frame relay T1 prices from frame-relay-t1.com.
Select the frame relay T1 price plans that interest you.
An independent consultant will contact you to discuss the details of the T1 connection, confirm pricing, and assist you with the signup process.

View a Sample Quote Here

Home VAR Search Contact Us Customer Login Affiliates BBS News Testimonials About Us Links Coverage Privacy

Frame Relay T1 Definition Continued.

Frame relay is many times faster than its predecessors, such as x.25, because frame relay is a streamlined protocol designed for speed. This protocol flourishes because it is designed to compliment modern digital lines which are virtually noise free. With frame relay T1, data transmission usually originates through the private line of a customer, transfers to a shared network at the nearest frame relay switch, travels the majority of its distance through the shared frame relay network, and then transfers to the private line closest to the receiving customer. Frame relay is normally less expensive than point-to-point lines because many customers use and share the cost of the frame relay network, rather than each paying for a private line for the entire distance their data is transmitted. Private line cost is distance sensitive, so the longer the distance utilized via a shared network, the greater the cost savings experienced by the customer. Another factor which makes frame relay less expensive than point-to-point is that the nearest frame relay node is often much closer to the customer than the provider’s central office. This results in less private line distance being calculated into pricing. An additional benefit is that with frame relay it is often possible to connect to a provider which is hundreds of miles away for close to the same price as connecting to a local provider. For this reason, the number of providers which can be compared is significantly expanded. Frame relay is primarily used for the transmission of intermediate data between LANs, and between end points of a wide area network. Frame relay is at times used for video conferencing, however, point-to-point lines, and MPLS are much better suited for the on-going high rate of bandwidth and signal stability required by video conferencing. As the price of clear channel T1 has dropped significantly during recent years, frame relay is no longer seen as the bargain it was historically. Point-to-point and MPLS networks are now runaway choices for most customers who in the past would have benefited from frame relay T1 usage. (Click here to return to top of page)

For details on any T1 related service, click on the service listed below.

T3 or DS3?

Written by: Dennis Green - Aug 20, 2008

In the context of telecommunications, the terms T3 and DS3 are often used synonymously to describe a 45 mbps (megabits per second) circuit. A T3/DS3 is the equivalent of 28 T1s. People who are more technically inclined will often refer to DS3 when they are talking about the configuration of the circuit, and T3 if they are referring to the physical connection which carries the circuit. Most people, however, use both terms interchangeably. T3/DS3 is used for carrying both voice (in the form of data) and data traffic. T3/DS3 is commonly used for larger point-to-point circuits, MPLS (multiprotocol label switching), Virtual Private Networks (VPN), internet traffic, call centers, and videoconferencing. To check availability or pricing for any T3 related services, please use the pricing tool located at the top of this page. It is easy to use, free, and without obligation. (Click here to return to top of page)